Home Cinema Installations and Sounds Transmission Through Doors

The reference level about a soundtrack is 105db and 115db for the LFE channel. Most people would find these levels quite high, but not hard to listen to, in a correctly designed home cinema room.

A problem occurs though, when we face the challenge of keeping prospective inside the cinema room. In a residential installation, quite often we find bedrooms and other living areas to be right next towards the Home Cinemas St Albans cinema room. Special room construction techniques allow us develop a sufficient noise barrier, in order to reduce any sound transmission to the adjacent rooms.

However, doors continually been the weakest point, in this kind attempt. The mass, damping and stiffness of the home cinema door determines its resistance to the passage of any sound waves. A door’s ability to reduce noise is written by its Sound transmission Class. This means, the higher in the Class the better the efficiency.

One more problem arises though; Sound waves can cross any opening with very little loss. And to top it off, a tiny hole in a barrier would transmit nearly as much sound for a much larger emergency. This acoustic property of sound could be a problem in a small cinema installation, where high quality construction is required. That’s the where acoustical gaskets come into appreciate. A home cinema door, in an effort to be effective, the seals around the head, jamb and sill must be complete and air-tight.

In other words, the actual of the acoustical gasket in a home cinema installation, would determine how close specific sound performance of the door, will arrive to the published standard. A hi-end home cinema design should take all the info into consideration, to ensure a hi-end acoustical stop result.